Hand torque multiplier, which is also named as hand torque amplifier, torsional torque multiplier, mostly adopts planetary structure, and is used for transfer small input torque into big output torque. This equipment is a bolt solution tool, when cooperated with hand wrench it could also being used for locking&loosening bolts/nuts with target torque. Under circumstances when large torque value is needed while limited space, or without electricity / compressed air power supply, as well as considering the cost when there is small quantity bolt, torque multiplier would be a practical and economic solution! For example, equipment maintenance in wild, mechanical equipment after-sales service, wind farm eqipment maintenance, etc.

  Wavor new 6200Nm hand torque multiplier, model HM-62, with fully consideration of the endurance, portable and accuracy. The new multiplier adopts two parts of planetary, tower structure, equipped with anti-rotate system, could being operated clockwise and anti-clockwise. Its torque ratio is 19.5, when input torque 318Nm the output torque would be 6200Nm (max).

  Disension: Max diameter length: 114mm. Weight of the torque multiplier: 9.2kg. Weight of the reaction arm: 3.4kg. Input square: 1/2", Output square: 1-1/2", fit for 1-1/2" inner/ outter hexgonal socket with ISO / DIN standard.

  This model hand torque multiplier could be applied for the locking / loosening of M27-M60 bolts, 41mm-90mm length nuts.
  Sooner Wavor would publish more new electric torque wrench, pneumatic torque wrench and hand torque multiplier, please attention our website, thanks!