Wavor new 2900Nm pneumatic torque wrench
Published：2016-06-29
2900 torque
Wavor launched two new model pneumatic torque wrench, 2900Nm straight pneumatic torque wrench and 2900Nm angle pneumatic torque wrench, torque range: 400-2900Nm!
The output accuracy is within ±5%, and under 6 bar air pressure could achieve the maximum 2900Nm torque value. The structure remained the two speed manual change speed system, while the planetary gear system is being highly optimized. The output square of this 2 new model pneumatic torque wrench is 1 inch, which fit for 1 inch hexagonal and inner-hex socket that subject to ISO and DIN standard.
The output accuracy is within ±5%, and under 6 bar air pressure could achieve the maximum 2900Nm torque value. The structure remained the two speed manual change speed system, while the planetary gear system is being highly optimized. The output square of this 2 new model pneumatic torque wrench is 1 inch, which fit for 1 inch hexagonal and inner-hex socket that subject to ISO and DIN standard.
2900Nm straight pneumatic torque wrench 2900Nm angle pneumatic torque wrench
This two new model fit for the locking / loosening of M20-M45 bolts and size 30-70mm nuts.When supplying the pneumatic torque wrench was equipped with standard F.R.L unit, standard reaction arm, spiral hose and connectors, all you need is connect to the compressed air power.
Both maximum diameter of the gearbox is 89mm. The length of this straight pneumatic torque wrench is 390mm, net weight 7.3kg. The height of this angle pneumatic torque wrench is 275mm, net weight 8.7kg. Both standard reaction arm is 1.4kg. Following is the dimension.
QPTW-29S 2900Nm straight pneumatic torque wrench
QPTW-29A 2900Nm angle pneumatic torque wrench
In recent Wavor would launch more ungraded pneumatic torque wrench and new version hand torque multiplier gradually, please kindly keep notice on Wavor news!